| |
|
VegaForceCompany
|
|
VFC JAPAN
|
|
VFC Italy
|
|
RedWolf
|
|
Zasdar
|
|
News
Product Maintenance Precautions【產品維護說明】 (2018-03-18 18:00:00.000000) Dear Customers,
If you already purchased VFC/Umarex HK416A5 AEG or planning to get one, you may noticed the all new stock tube structure, which is thread mounted onto receiver just realistic like GBBRs, This design could providing more larger battery space and more tougher strength for AR style AEGs.
However, The stock tube thread was glued during factory assembly for best stability, so it can not to be removed by normal wrench or vice works, which may needs heat treat to soften metal glue before disassembly.
So We don't recommend users try to disassemble by yourselves at home, If you need repair, we'll recommend you ask professional airsoft workshops for helping.
Another point must be careful is the rear gearbox wiring, there is a protruding tip on the top of buffer tube front opening, which may cuts wires broken while turning the tube down, so the gearbox should be remove from lower receiver before disassemble the stock tube.
Hope you'll enjoy all the performance and innovations of new HK416A5 AEG version.
Thank you.
The original outer package of VFC H&K VP9 are all cartons, VFC did not provide any special edition, please noticed.
不少國內外玩家朋友已經購買了VFC/Umarex所推出的HK416A5電動槍，這款全新電槍有個很大的特色，就是從傳統AEG托桿改為相似於GBB的結構設計，讓槍枝擁有更大的電池空間、以及更穩固的槍托結構。
但是要特別提醒玩玩家朋友，為了確保槍托的穩固與強度，托桿與槍身之間在出廠時是有使用金屬固定膠膠合的，而非像外表看起來得隨時可以轉開，如果直接拆卸的話將可能導致托桿螺牙受損。此外拖桿上方也有定向用的凸出構造，直接拆卸的話也會在轉出重中割傷齒輪箱的後出電源線、造成短路危險。
因此不建議玩家自行拆卸托桿、如有維修需要請務必拿攜回服務中心、或有能力處理膠合零件的資深維修店家，如果您身在國外或或附近沒有適合的店家而必須自行維修，拆卸前也請記得先將齒輪箱移除。
以上注意事項也適用於Avalon Samurai等有相似結構的新一代電動槍，再請玩家朋友留意。 ... more News source:VFC Official FB Page
VFC MP7A1 TIPS (2014-02-05 00:00:00.000000) To dear valuable MP7 users, please be advised:
These two screws, in front of MP7 bolt carrier, have to be loctite after disassembly,
Due to the heavy recoil, malfunction will be occurred by the losing screws.
致MP7A1 GBB的使用者：
當你分解了MP7的槍機頭時，請務必使用螺絲膠固定槍機頭上面兩顆螺絲，以免因後座力使螺絲脫落。 News source:VFC Support
Bunny Workshop: VFC MP7A1 GBB Demo (2014-01-28 00:00:00.000000) Here's a quick video of the VFC MP7A1 GBB SMG Asia Edition which is now in stock at Bunny Workshop... "Umarex H&K Licensed Gas Blowback MP7A1 Gas Blow Back Submachine Gun with Fully & Semi-Automatic Shooting Modes. Each cycling … ... more News source:Popular Airsoft
|
Videos
 |
VFC Virgo M4 Conversion Kit
Your Style, You Kit Up! |
| |
|
|
VFC UMAREX VP9
VFC VP9 review in Deutsch - English Subtitle from BB2K Airsoft, enjoy!
from BB2K Airsoft
|
|
